Changes required for version 2.2.12251.1808R (2012-09-22 14:09:58 -0600 by Bret McKee ) Changes for 2.2.12251.1808 (2012-09-07 18:09:48 -0600 by Bret McKee ) Fix width of PID in setup dialog (2012-09-07 17:01:31 -0600 by Bret McKee ) Make expired betas non-fatal (2012-09-07 16:25:54 -0600 by Bret McKee ) Add usb disconnect on camera disconnect (2012-09-07 16:24:45 -0600 by Bret McKee ) Changes required for v2.2.12234.2312 (2012-08-21 23:18:20 -0600 by Bret McKee ) Add camera info for H18 (2012-08-21 23:17:52 -0600 by Bret McKee ) changes for version 2.2.12232.2005 (2012-08-19 20:07:41 -0600 by Bret McKee ) Remove untested attribute from H674/H694 cameras (2012-08-19 20:05:18 -0600 by Bret McKee ) Changes for 2.2.12222.2231 (2012-08-09 22:33:44 -0600 by Bret McKee ) Zero length exposures do not open the shutter (2012-08-09 22:30:31 -0600 by Bret McKee ) Changes for v2.2.12221.1231 (2012-08-08 12:33:20 -0600 by Bret McKee ) Don't open the shutter for darks (2012-08-08 12:31:22 -0600 by Bret McKee ) Change for version 2.2.12219.2150 (2012-08-06 21:52:27 -0600 by Bret McKee ) Change for version 2.2.12219.2140 (2012-08-06 21:41:37 -0600 by Bret McKee ) Intial changes to support cameras with shutters (2012-08-06 21:34:34 -0600 by Bret McKee ) Make expiration date a registration parameter (2012-07-18 01:25:01 -0600 by Bret McKee ) Fix Gaussian Blur edge effects (2012-07-15 22:38:23 -0600 by Bret McKee ) Update readme (2012-07-15 19:08:50 -0600 by Bret McKee ) Enable SuperStar binning (2012-07-15 17:23:20 -0600 by Bret McKee ) Changes for 2.2.12197.2238 (2012-07-15 22:39:45 -0600 by Bret McKee ) Fix Gaussian Blur edge effects (2012-07-15 22:38:23 -0600 by Bret McKee ) Update readme (2012-07-15 19:08:50 -0600 by Bret McKee ) Changes required for 2.2.12197.1722 (2012-07-15 17:24:46 -0600 by Bret McKee ) Enable SuperStar binning (2012-07-15 17:23:20 -0600 by Bret McKee ) Fix a superstar issue (2012-07-02 16:06:41 -0600 by Bret McKee ) Changes required for V2.2.12175.1719 (2012-06-23 17:21:55 -0600 by Bret McKee ) Add support for superstar as guide camera (2012-06-23 16:43:38 -0600 by Bret McKee ) Changes for 2.2.12169.1031 (2012-06-17 10:33:55 -0600 by Bret McKee ) change install script to detect uninstallable previous versions (2012-06-17 10:28:51 -0600 by Bret McKee ) log some expiration date info (2012-06-17 09:39:27 -0600 by Bret McKee ) Update README.release.txt (2012-06-17 09:41:38 -0600 by Bret McKee ) Changing defaults for new interlaced features (2012-06-14 21:43:30 -0600 by Bret McKee ) Backporting ICameraV2 lodestar/interlaced changes (2012-06-14 00:52:42 -0600 by Bret McKee ) Changes for version 2.2.12168.0946 (2012-06-16 10:02:16 -0600 by Bret McKee ) Adding the bump_version.py script (2012-06-16 09:44:04 -0600 by Bret McKee ) Installer now autouninstalls previous version (2012-06-16 09:09:27 -0600 by Bret McKee ) Adding support for Superstar and 674/694 based cameras (2012-05-06 16:39:24 -0600 by Bret McKee ) Backport the logging from ICamera2 (2012-05-06 17:38:55 -0600 by Bret McKee ) Changes to setup version number parsing (2011-09-15 21:54:40 -0600 by Bret McKee ) Add additional error handling to the installer (2011-09-14 19:55:05 -0600 by Bret McKee ) Adding lodestar dump files (2011-10-07 22:47:46 -0600 by Bret McKee ) Changes for v2.1.1.2 (2011-07-02 16:27:30 -0600 by Bret McKee ) fixed a broken assertion (2011-07-02 16:17:17 -0600 by Bret McKee ) Adding to .gitignore (2011-07-02 16:16:25 -0600 by Bret McKee ) Adding dumped costar data (2011-07-02 16:16:06 -0600 by Bret McKee ) Changes for release 2.1.1.1 (2011-06-18 20:14:00 -0600 by Bret McKee ) More cleanup and perf (2011-06-18 19:46:25 -0600 by Bret McKee ) change for v1.5.9.5 (2011-06-18 10:18:15 -0600 by Bret McKee ) Enhancing dumped image support (2011-06-18 00:50:41 -0600 by Bret McKee ) reorganize some of the interlaced code, fix bugs (2011-06-15 01:05:26 -0600 by Bret McKee ) better propogation of errors from exposure failure (2011-06-15 01:04:19 -0600 by Bret McKee ) more performance changes (2011-06-12 23:05:48 -0600 by Bret McKee ) version changes for minor versions (2011-06-08 23:04:18 -0600 by Bret McKee ) More performance changes (2011-06-08 23:03:52 -0600 by Bret McKee ) Change default binning to 8X for debug, 4X for release (2011-06-08 23:02:39 -0600 by Bret McKee ) fixed an introduced problem (2011-06-06 19:22:14 -0600 by Bret McKee ) log changes (2011-06-06 07:49:27 -0600 by Bret McKee ) Changes for version 1.5.9 (2011-06-05 20:24:30 -0600 by Bret McKee ) performance changes (2011-06-05 12:23:10 -0600 by Bret McKee ) Changes for v1.5.7 (2011-06-04 13:02:07 -0600 by Bret McKee ) reorder mutex acquire and gethandle (2011-06-04 12:58:07 -0600 by Bret McKee ) Costar cleanup (2011-06-04 12:57:44 -0600 by Bret McKee ) Adding mutex code to prevents multipe device opens (2011-06-04 12:18:52 -0600 by Bret McKee ) Renaming mutex to lock (2011-06-04 11:40:12 -0600 by Bret McKee ) Some cleanup to controller storage (2011-06-03 23:29:03 -0600 by Bret McKee ) More changes to allow multiple cameras (2011-06-03 22:54:43 -0600 by Bret McKee ) Changes to allow parallel controller access (2011-06-03 22:53:00 -0600 by Bret McKee ) Fix a log message typo (2011-06-03 22:40:44 -0600 by Bret McKee ) Remove and unused USB routine (2011-06-03 22:24:02 -0600 by Bret McKee ) Add more debug ouput to the pid/vid search (2011-06-02 23:38:09 -0600 by Bret McKee ) Setup changes to support 8 cameras (2011-06-02 23:29:01 -0600 by Bret McKee ) first pass of changes for multiple cameras (2011-06-02 22:15:04 -0600 by Bret McKee ) disable 7X binning and Costar use of the sw timing (2011-06-02 20:59:29 -0600 by Bret McKee ) Set default max bining to 4 (2011-06-02 20:58:20 -0600 by Bret McKee ) change for v1.5.6 (2011-06-02 16:57:58 -0600 by Bret McKee ) remove some logging from CoStar decoder (2011-05-31 23:07:50 -0600 by Bret McKee ) bump version number (2011-05-31 22:55:24 -0600 by Bret McKee ) Changes for v1.5.5 (2011-05-31 06:57:59 -0600 by Bret McKee ) Fixed a costar debug write message (2011-05-31 06:56:06 -0600 by Bret McKee ) Changes for v1.5.4 (2011-05-31 00:51:39 -0600 by Bret McKee ) change entry to make CoStar progressive (2011-05-31 00:48:16 -0600 by Bret McKee ) Changes for version 1.5.3 (2011-05-30 22:01:33 -0600 by Bret McKee ) Changes to support Costar bias and binning (2011-05-30 22:00:52 -0600 by Bret McKee ) switch ccdXXXX and frameXXXX (2011-05-30 13:02:04 -0600 by Bret McKee ) Intial changes for CoStar (2011-05-30 11:04:19 -0600 by Bret McKee ) enhancements to release instructions (2011-05-30 11:02:26 -0600 by Bret McKee ) First changes multiple cameras of the same type (2011-05-30 11:00:04 -0600 by Bret McKee ) Adding additional temperature checks for conform (2011-05-30 10:55:39 -0600 by Bret McKee ) Changes required for v1.5.2 (2011-05-29 09:55:37 -0600 by Bret McKee ) two minor changes to sx_camera.cs (2011-05-29 09:45:02 -0600 by Bret McKee ) Changes for v1.5.1 - the first release version (2011-05-14 19:20:23 -0600 by Bret McKee ) Removing untested flag from Lodestar (2011-05-14 19:01:54 -0600 by Bret McKee ) Changes for version 1.4.1 (2011-05-01 23:38:39 -0600 by Bret McKee ) Change expired message (2011-04-13 21:42:50 -0600 by Bret McKee ) Change processor to x86 (2011-04-13 21:35:26 -0600 by Bret McKee ) Change the hardware timer threshold to 1.1 sec (2011-04-13 21:16:22 -0600 by Bret McKee ) move code from under #ifdef DEBUG (2011-04-13 21:14:21 -0600 by Bret McKee ) Updated readme from teh last release (2011-04-13 21:10:50 -0600 by Bret McKee ) Changes required for version 1.3.12 (2011-03-20 13:59:29 -0600 by Bret McKee ) Working on progressive camera banding (2011-03-20 13:52:48 -0600 by Bret McKee ) Adding a real timestamp at the top of the log file (2011-03-20 13:52:20 -0600 by Bret McKee ) Fixing mixed line endings in a file (2011-03-20 13:51:40 -0600 by Bret McKee ) Cleaning up log message to match the last change (2011-03-05 22:28:08 -0700 by Bret McKee ) Added the flag to clear vertical registers (2011-03-05 22:23:08 -0700 by Bret McKee ) Clean up mixed line endings in logging.cs (2011-02-19 08:05:24 -0700 by Bret McKee ) Correct unit test usage message (2011-02-19 08:05:03 -0700 by Bret McKee ) Change the reported version number format (2011-02-16 20:14:27 -0700 by Bret McKee ) Stop using m_controller for lock (2011-02-16 20:12:48 -0700 by Bret McKee ) changes to the unit tests (2011-02-13 08:54:05 -0700 by Bret McKee ) The rest of the 7X binning changes (2011-02-13 08:53:11 -0700 by Bret McKee ) Add shortcircuit code for 7X binning (2011-02-13 08:47:45 -0700 by Bret McKee ) Fixing an exposure time problem (2011-02-13 08:28:22 -0700 by Bret McKee ) Fix a problem introduced with the inerlaced color changes (2011-02-12 14:25:03 -0700 by Bret McKee ) Fix a problem with unit tests (2011-02-12 14:17:00 -0700 by Bret McKee ) Fixed a problem configuring binning (2011-02-12 14:16:38 -0700 by Bret McKee ) Fix a problem with interlaced pixel height (2011-02-12 14:10:15 -0700 by Bret McKee ) Interlaced changes for color cameras (2011-02-12 12:17:01 -0700 by Bret McKee ) Changes to allow configuration of binning (2011-02-12 12:15:13 -0700 by Bret McKee ) Changes to unit tests (2011-02-11 21:47:16 -0700 by Bret McKee ) Change to assert (2011-02-11 21:46:44 -0700 by Bret McKee ) Improve some debug messages (2011-02-09 19:03:34 -0700 by Bret McKee ) Changes required for V1.3.11 (2011-02-07 07:23:36 -0700 by Bret McKee ) Work continues on binning/subimages (2011-02-07 07:16:36 -0700 by Bret McKee ) Added a bunch more unit tests (2011-02-07 07:16:23 -0700 by Bret McKee ) Add stack backtrace to some setError calls (2011-02-07 07:14:57 -0700 by Bret McKee ) Changes to get unit tests passing with binning (2011-02-06 18:12:52 -0700 by Bret McKee ) Fix a typo (2011-02-06 18:12:44 -0700 by Bret McKee ) Adding the python unit test (2011-02-06 18:11:53 -0700 by Bret McKee ) clean up paramter checking (2011-02-03 23:09:01 -0700 by Bret McKee ) Move freezeParameters call to be a bit earlier (2011-02-03 22:24:57 -0700 by Bret McKee ) Change a M25C reference to use the enum (2011-02-03 21:58:40 -0700 by Bret McKee ) Remove a hack for interlaced testing (2011-02-03 21:57:40 -0700 by Bret McKee ) Changes for v1.3.10 (2011-02-01 00:32:53 -0700 by Bret McKee ) Fix a problem with interlaced stitching (2011-02-01 00:28:40 -0700 by Bret McKee ) Changes required for V1.3.9 (2011-01-30 20:15:46 -0700 by Bret McKee ) Move setting of delayMS before freezeParamters() (2011-01-30 20:12:17 -0700 by Bret McKee ) Adding absolute time to log messages (2011-01-30 20:11:55 -0700 by Bret McKee ) Changes required for V1.3.8 (2011-01-20 22:21:10 -0700 by Bret McKee ) Updated a reference (2011-01-20 22:08:26 -0700 by Bret McKee ) Changes to interlaced binning (2011-01-20 22:07:23 -0700 by Bret McKee ) More changes for v1.3.7 (2011-01-02 21:36:38 -0700 by Bret McKee ) Changes for release 1.3.7 (2011-01-02 21:26:01 -0700 by Bret McKee ) Removed SetupWizard and SharedVersionNumber.cs (2011-01-02 21:13:09 -0700 by Bret McKee ) Changes to use Main config for Guider (2011-01-02 20:32:52 -0700 by Bret McKee ) Seperate the config date for the cameras (2011-01-02 19:08:25 -0700 by Bret McKee ) Massive reorganization into a single .exe (2011-01-01 19:40:44 -0700 by Bret McKee ) Build Cleanup (2011-01-01 11:47:34 -0700 by Bret McKee ) Fix the com setting that prevented release builds (2010-12-27 17:56:53 -0700 by Bret McKee ) Added .swp files to .gitignore (2010-12-27 11:58:34 -0700 by Bret McKee ) Removed some redundant member variables (2010-12-27 11:51:27 -0700 by Bret McKee ) Fixed an error in guide camera initialization (2010-12-27 11:46:43 -0700 by Bret McKee ) Changes to bump the version number to v1.3.6 (2010-12-25 22:43:25 -0700 by Bret McKee ) Removed a debug MessageBox (2010-12-25 22:32:19 -0700 by Bret McKee ) Fixed a couple minor exception/seterror problems (2010-12-25 22:31:53 -0700 by Bret McKee ) More work to clean up interlaced cameras (2010-12-25 15:01:30 -0700 by Bret McKee ) Setup wizard work. It seems to work (2010-12-25 14:10:45 -0700 by Bret McKee ) Initial checkin of the setup wizard (2010-12-25 00:25:52 -0700 by Bret McKee ) Some changes for interlaced cameras (2010-12-25 00:25:22 -0700 by Bret McKee ) Quiet down some logging (2010-12-22 19:08:37 -0700 by Bret McKee ) Added more debug info to stitchImages (2010-12-22 18:38:59 -0700 by Bret McKee ) Fixed a problem with interlaced cameras (2010-12-22 17:15:00 -0700 by Bret McKee ) Moved to the .NET profile class (2010-12-12 18:33:46 -0700 by Bret McKee ) More label changes to setup dialog (2010-12-11 22:24:05 -0700 by Bret McKee ) a few changs to the setup dialog (2010-12-11 22:07:11 -0700 by Bret McKee ) Moved setupdialog() to config.cs (2010-12-11 21:43:08 -0700 by Bret McKee ) Make the setup dialog easier to understand (2010-12-11 12:07:41 -0700 by Bret McKee ) Removed "untested" status from H16 (2010-12-11 00:41:56 -0700 by Bret McKee ) A bunch of changes to make logging more consitent (2010-12-11 00:21:45 -0700 by Bret McKee ) Changes for v1.3.5 (2010-12-09 22:55:11 -0700 by Bret McKee ) change cooler support to not be under untested (2010-12-09 22:21:15 -0700 by Bret McKee ) Adding the files for the second main camera (2010-12-09 21:20:16 -0700 by Bret McKee ) Fixed a few problems from the refactoring (2010-12-09 21:18:07 -0700 by Bret McKee ) Fixing problems with mixed mode line endings (2010-12-09 20:02:24 -0700 by Bret McKee ) Fixed the detection of mixed mode (2010-12-09 20:01:37 -0700 by Bret McKee ) Connecting the plumbing for two USB cameras (2010-12-09 19:30:52 -0700 by Bret McKee ) Fixed eol.py (2010-12-09 16:32:33 -0700 by Bret McKee ) Add second camera parms to the setupdialog (2010-12-09 00:20:08 -0700 by Bret McKee ) Added a class for a second main camera (2010-12-08 23:26:45 -0700 by Bret McKee ) Another step towards two main cameras (2010-12-07 23:47:59 -0700 by Bret McKee ) More work on interleaved cameras (2010-12-07 21:46:21 -0700 by Bret McKee ) Begin work on interleaved camera support (2010-12-06 22:40:24 -0700 by Bret McKee ) More work towards multiple main cameras (2010-12-06 00:23:28 -0700 by Bret McKee ) Begin work on multiple main cameras (2010-12-05 21:11:34 -0700 by Bret McKee ) Changed camera parameter initialization (2010-12-05 14:33:06 -0700 by Bret McKee ) Changes for v1.3.4 (2010-12-05 13:25:21 -0700 by Bret McKee ) Improved cooler support (2010-12-05 13:17:00 -0700 by Bret McKee ) Add some additional logging (2010-12-02 23:27:59 -0700 by Bret McKee ) Remove conform output from source tree (2010-12-02 23:12:29 -0700 by Bret McKee ) Edit readme for v1.3.3 (2010-12-02 20:58:30 -0700 by Bret McKee ) Change log extension to .txt (2010-12-02 20:55:04 -0700 by Bret McKee ) Prepare for v1.3.3 (2010-12-02 20:51:26 -0700 by Bret McKee ) Enhanced cooler support (2010-12-02 20:45:47 -0700 by Bret McKee ) Final changes before release 1.3.2 (2010-12-01 23:12:39 -0700 by Bret McKee ) Bump version numbers for v1.3.2 (2010-12-01 20:59:12 -0700 by Bret McKee ) Fix a Datetime parsing problem in non US locales (2010-12-01 20:26:45 -0700 by Bret McKee ) Added more logging in some exception paths (2010-12-01 20:15:30 -0700 by Bret McKee ) Added version number to installer executable (2010-11-28 19:56:44 -0700 by Bret McKee ) Fix an error in a path name (2010-11-28 19:36:18 -0700 by Bret McKee ) Changed to common version numbers (2010-11-28 18:18:43 -0700 by Bret McKee ) Installer script changes for Release version (2010-11-28 16:55:16 -0700 by Bret McKee ) Moved support for sx cooler under untested (2010-11-28 16:01:56 -0700 by Bret McKee ) Initial attempt at adding regulated cooler support (2010-11-27 22:40:25 -0700 by Bret McKee ) Improved the handling of config parameters (2010-11-09 21:13:51 -0700 by Bret McKee ) Change build file post build action (2010-11-07 23:24:13 -0700 by Bret McKee ) Fixed a copule issues with the port (2010-11-07 23:23:47 -0700 by Bret McKee ) Revert "Changed CPU type to x86" (2010-11-07 21:16:45 -0700 by Bret McKee ) Changed CPU type to x86 (2010-10-30 23:44:50 -0600 by Bret McKee ) Ported template code that does privilege elevation (2010-10-30 23:44:14 -0600 by Bret McKee ) Went through the driver "todo" items (2010-10-30 22:23:19 -0600 by Bret McKee ) Added #if DEBUG to change some setup defaults (2010-10-30 22:21:46 -0600 by Bret McKee ) Added tooltips to the setup dialog (2010-10-30 22:21:04 -0600 by Bret McKee ) Added electrons/ADU data for more cameras (2010-10-30 22:18:33 -0600 by Bret McKee ) Added camera type values + more H9 information (2010-10-23 17:07:26 -0600 by Bret McKee ) Fix a typo, changing MX25C to M25C (2010-10-23 16:15:18 -0600 by Bret McKee ) Preparing to release V1.3.1 - AKA RC1 (2010-10-21 14:48:47 -0600 by Bret McKee ) Also removing the *.user from git (2010-10-19 17:59:39 -0600 by Bret McKee ) Modified .gitignore to ignore .suo files (2010-10-19 17:56:39 -0600 by Bret McKee ) Removed the annoying .suo file (2010-10-19 17:55:35 -0600 by Bret McKee ) Fixing a try/finally error (2010-10-09 08:42:51 -0600 by Bret McKee ) Adding the solve-n-sync script (2010-10-04 00:34:09 -0600 by Bret McKee ) Add README.release.txt (2010-10-03 14:59:55 -0600 by Bret McKee ) Adding a some utility programs (2010-10-02 19:09:46 -0600 by Bret McKee ) A bunch of cleanup, mostly adding try/catch blocks (2010-10-02 19:04:01 -0600 by Bret McKee ) Added secondsAreMilliseconds (2010-09-20 00:37:34 -0600 by Bret McKee ) Making the config dialog deisner friendly again (2010-09-20 00:21:29 -0600 by Bret McKee ) Changed the default to enable logging (2010-09-12 16:52:31 -0600 by Bret McKee ) Preparing for version 1.2.1 (2010-09-12 16:50:12 -0600 by Bret McKee ) Fixed a problem with M25C subimages (2010-09-12 16:29:43 -0600 by Bret McKee ) It seems that (at least) Imanges Plus writes the offests into the fite files and deals with the offsets. More testing is required, but if this seems to be true, the code needs to be totally removed. (2010-08-29 22:39:20 -0600 by Bret McKee ) Make sure ASCOM exceptions git thrown (2010-08-29 22:38:04 -0600 by Bret McKee ) Added more logging to the create path. (2010-08-21 13:38:06 -0600 by Bret McKee ) More changes to .gitignore (2010-08-07 22:43:21 -0600 by Bret McKee ) .gitignore changes (2010-08-07 00:37:27 -0600 by Bret McKee ) Add the (forgotten) Config.cs file (2010-08-07 00:29:41 -0600 by Bret McKee ) Added name decoding for H9C (2010-08-06 23:41:34 -0600 by Bret McKee ) Added config options, fixed a ElectronsPerADU bug (2010-08-06 22:58:22 -0600 by Bret McKee ) Changes to installer script (2010-07-28 23:08:55 -0600 by Bret McKee ) Getting ready for first Alpha release (2010-07-28 22:22:34 -0600 by Bret McKee ) Renamed the readme and license files (2010-07-27 21:34:23 -0600 by Bret McKee ) Work on software controlled fast exposures (2010-07-26 21:45:57 -0600 by Bret McKee ) Fixes for binning (2010-07-26 17:02:07 -0600 by Bret McKee ) Corrected a spelling error (2010-07-26 17:01:16 -0600 by Bret McKee ) More changes to binning/subimages (2010-07-20 14:56:20 -0600 by Bret McKee ) Some progess on binning and subexposures (2010-07-20 02:14:40 -0600 by Bret McKee ) Intermediate checkin for subframes (2010-07-19 14:39:25 -0600 by Bret McKee ) Trying to track down timing issues (2010-07-15 22:02:10 -0600 by Bret McKee ) Clearing modified before working on speed (2010-07-12 21:56:40 -0600 by Bret McKee ) Binning now might work (not yet teste) (2010-05-22 17:16:58 -0600 by Bret McKee ) More work to pass Conform (2010-05-20 23:22:22 -0600 by Bret McKee ) Added error checking to Main and Guide routines (2010-05-19 23:56:25 -0600 by Bret McKee ) A bunch of changes to error handling. (2010-05-19 23:27:11 -0600 by Bret McKee ) Changes motivated by running the ASCOM conform (2010-05-18 00:12:22 -0600 by Bret McKee ) More installer changes for Alpha 1 (2010-05-17 00:55:15 -0600 by Bret McKee ) Getting ready for the Alpha 1 release (2010-05-17 00:35:59 -0600 by Bret McKee ) Installer changes (2010-05-16 22:58:14 -0600 by Bret McKee ) Remove unused imageAsBytes data (2010-05-16 22:57:00 -0600 by Bret McKee ) Renamed the Logging dll (2010-05-16 22:56:17 -0600 by Bret McKee ) Remove a trace of the former image processing (2010-05-16 22:55:12 -0600 by Bret McKee ) Disable binning for the alpha release (2010-05-16 22:34:38 -0600 by Bret McKee ) Fixed the code for the M25C so that the data is correctly descrabled so that it can be debayered. (2010-05-16 20:03:42 -0600 by Bret McKee ) Adding a full set of .gitignore files (2010-05-15 00:00:04 -0600 by Bret McKee ) Adding the (almost) empty directory SXCameraServedClasses, which is where the obj files go for debug runs. (2010-05-14 23:55:42 -0600 by Bret McKee ) Some cleanup - reformatted prints, etc. (2010-05-13 05:59:42 +0000 by Bret McKee ) A bit more cleanup (2010-05-11 04:32:13 +0000 by Bret McKee ) Moved logging to its own file, added some comment (2010-05-11 03:59:07 +0000 by Bret McKee ) Moved logging to its own file, added some comment (2010-05-11 03:58:04 +0000 by Bret McKee ) Moved logging to its own file, added some comment (2010-05-11 03:57:29 +0000 by Bret McKee ) Moved logging to its own file, added some comments (2010-05-11 03:56:50 +0000 by Bret McKee ) Moved logging to its own class (2010-05-11 03:55:15 +0000 by Bret McKee ) Added some comments (gasp!), moved logging into it's own assembly and project so that it can be accessed from all the routines (2010-05-11 03:47:40 +0000 by Bret McKee ) Re-arranged the locking (yet another time). Moved guiding into the controller class, and made guiding synchronous. (2010-05-11 03:01:35 +0000 by Bret McKee ) Working on getting pulseguide locking right (2010-05-10 06:30:18 +0000 by Bret McKee ) hopefully the end of the refactoring (2010-05-08 06:05:39 +0000 by Bret McKee ) refactoring still (2010-05-08 05:58:23 +0000 by Bret McKee ) Just about done refactoring (2010-05-08 05:46:07 +0000 by Bret McKee ) And again (2010-05-08 04:40:01 +0000 by Bret McKee ) Cleaning up (2010-05-08 04:39:05 +0000 by Bret McKee ) And more refactoring (2010-05-08 04:35:27 +0000 by Bret McKee ) The rearrangement continues (2010-05-08 04:31:59 +0000 by Bret McKee ) Continued cleaning (2010-05-08 04:22:20 +0000 by Bret McKee ) Cleaning up (2010-05-08 04:18:23 +0000 by Bret McKee ) Undo the previous change, which failed half way through (2010-05-08 04:15:21 +0000 by Bret McKee ) A lot of rearranging (2010-05-08 03:59:55 +0000 by Bret McKee ) Some installer related changes (2010-05-08 00:49:01 +0000 by Bret McKee ) Working on turning on the Guide port (2010-05-05 04:56:58 +0000 by Bret McKee ) Added code to use the hardware timer for short exposures on the guide camera (2010-05-04 04:05:28 +0000 by Bret McKee ) Checking in the kludge of doubling the width and halving the height. I don't understand why it works, but it seems to and the SX basic code does it that way... (2010-05-03 04:11:32 +0000 by Bret McKee ) Archiving changes. Still trying to figure out why I get a semaphore timeout on a write. (2010-05-01 17:59:53 +0000 by Bret McKee ) Working on adding support for two cameras at once (2010-04-27 05:51:03 +0000 by Bret McKee ) After lots of changes, this version seems to run with PHD (2010-04-27 04:38:24 +0000 by Bret McKee ) Cleaned up some things. (2010-04-25 04:16:25 +0000 by Bret McKee ) Move the sxASCOM under the sx directory (2010-04-25 02:31:42 +0000 by Bret McKee )